ThermiCare Refresher Professional

ThermiCare Refresher incl. Timer: No chance for bacteria and pathogens! Working outdoors and even at the office makes us sweat in the summer time, especially out feet. The result: moist boots creating a virtual hotbed for bacteria and pathogens. And not to mention the associated bad odours and health consequences such as athlete’s foot. ThermiCare Refresher is capable of drying your boots efficiently on only a few hours, while conserving the materials. In addition, it absorbs unpleasant odours to make your workday more pleasant. Thanks to the 12 volt version which can be connected to the cigarette lighter, the process can be started as early as during the car ride, ensuring that the boots arrive home in a hygienically clean state. Package content:

  • 1 ThermiCare Refresher (120 V/230 V incl. Timer or 12 V car version without timer)

Usage

Dries wet shoes (as well as gloves) in a few hours, conserving the material

Models

Type: 120 V, 230 V (EU), 230 V (UK) 12 V
Voltage: 120 V (60 Hz), 230 V (50 Hz), 12 V DC
Plug: 120 V (US), 230 V (EU or UK), 12 V (Car, cigarette lighter)
Timer: for the 120 V and 230 V Version with 1h, 3h or 6h
Hygiene function: UV light, integrated Scent
Operation: Continuous operation, Timer operation (12 V version: continuous operation, Manual ON/OFF)
Status display: 1 LED blue

Heating Power

120 V, 230 V: 50 watts
12 V: 35 watts

Heating Element

Ceramic power resistor

Heat Exchanger

Aluminium

Temperature at the nozzle

45 °C/113 °F (at room temperature 20 °C/68 °F, after 2 hours)

Air flow rate

2600 l/h on every nozzle

Rotational speed of the fan

2700 rpm

Temperature control on heating element

120 V, 230 V: Thermo switch 105 °C/221 °F
12 V: Thermo switch 100 °C/212 °F

Safety function on heating element

Thermal fuse: 125 °C/257 °F

Case

Impact-resistant ABS plastic

Bootdryer Professional

Therm-ic Bootdryer Professional - drying at the push of a button to make your boots as good as new. For a perfect start of the new workday.

Therm-ic Bootdryer Professional
A specially designed ventilation technique is used in the Therm-ic Bootdryer Professional that allows hot air to circulate within the boot. The air temperature is automatically controlled; the overheat protection offers additional safety. Boots are dried quickly and efficiently. Moreover, the smelly odour disappears and nothing prevents the reuse of the boots.

Package content:

  • 1 Therm-ic Bootdryer Professional (230 V / 120 V)

Usage

Dries soaking wet boots or gloves in a few hours

Models

Type: 120 V, 230 V (EU), 230 V (UK)
Voltage: 120 V (60 Hz), 230 V (50 Hz)
Plug: 120 V (US), 230 V (EU or UK)
Timer: NO
Hygiene function: NO
Operation: Continuous operation, ON/OFF manually)
Status display: NO

Heating Power

50 watts

Heating Element

Ceramic power resistor

Heat Exchanger

Aluminium

Temperature at the nozzle

45 °C/113 °F (at room temperature 20 °C/68 °F, after 2 hours)

Air flow rate

2600 l/h on every nozzle

Rotational speed of the fan

2700 rpm

Temperature control on heating element

Thermo switch 105 °C/221 °F

Safety function on heating element

Thermal fuse: 125 °C/257 °F

Case

Impact-resistant ABS plastic

Bootwarmer Professional

Therm-ic Bootwarmer Professional - your boots will never again be cold and wet!

Moist and cold boots spoil any workday. Drying and pre-heating the boots is the best solution for this case. The Therm-ic Bootwarmer Professional reaches its operating temperature within five minutes, is capable of pre-warming all types of boots for use in the cold, so that you can wholeheartedly enjoy your workday.  

The Bootwarmer Professional even allows you to warm up the boots to a pleasant temperature while you are driving. The 12 volt car version provides a comfortable entry into the boot and cozy warmth for your feet from the first minute. After a long workday, the boots can be dried on your drive home.

Thanks to the Therm-ic Bootwarmer Professional, your boots are ready to use any time and cold wet boots are a thing of the past!

Package content:

  • 1 Therm-ic Bootwarmer Professional (230 V / 120 V / 12V car version)

Usage

Warms up and dries boots or gloves in a few hours

Models

120 V (60 Hz) US
230 V (50 Hz) EU
230 V (50 Hz) EU
120 V DC, Car, cigarette lighter

Heating Power

Max. 2 x 6 watts, continuous

Heating Element

PTC element

Temperature regulation

PTC element

Safety function

PTC element

Temperature

On case surface: 65 °C / 149 °F
Controlled

Case

ABS, impact resistant
Protection against splash water